RETEST
Return to the decision area
A retest is a revisit after something meaningful changed: a reclaim, structure break, displacement move, or support/resistance flip. The retest should relate to that change, not just any random pullback.
Lesson 5 of 6Open Setup Analyzer
LESSON 05 · RETEST & CLEAR ROOM
A good reaction can still be in a bad location.
After reaction and confirmation, ScribeMoor asks two separate questions: did price return to a meaningful area, and how much structural room exists before the next opposing level?
HOLD / REJECT
Observe what happens on return
Price may hold the reclaimed area, reject from it, move through it, or stall. Record the actual response instead of assuming the retest must work.
CLEAR ROOM
Measure opposing structure
Measure from the observed decision area toward the next meaningful opposing structural level. That distance is context for the setup, not a forecast of how far price will travel.
VALID VS WEAK RETEST
Not every revisit deserves the same weight.
Stronger observation
- Reaction or reclaim happened first
- Structure changed or displacement appeared
- Price returns to the relevant broken/reclaimed area
- The retest response is visible and recordable
Weaker observation
- No prior reaction or structure change
- Random 1m pullback labeled as a retest
- Price chops repeatedly through the area
- The level is selected after the fact to justify the setup
CLEAR ROOM MAP
Entry area → opposing structure
This simplified example shows how room is measured. If the decision area is near 29,500 and the next meaningful opposing level is near 29,524, the observed room is approximately 24 points. That measurement can be compared with the user's saved threshold.
20+ POINT STUDY THRESHOLD
Use the threshold as a filter to test, not a promise.
For your MNQ/NQ structural framework, ScribeMoor can use 20 points as the default minimum-room reference. The purpose is to separate observations with nearby opposing structure from observations with more space. Later, Framework Learning can compare your own linked historical trades at different room thresholds.
Important: 20 points does not mean price will move 20 points. It only describes the minimum structural space you chose to study.
SEQUENCE CHECK
Keep the order intact.
01LEVEL
02REACTION
03CONFIRMATION
04RETEST
05CLEAR ROOM
A retest without confirmation is not the same observation. Clear room without a meaningful level is just distance. The value comes from keeping each step tied to the sequence.
CHECKPOINTS
Test the retest and room logic.
0/4 answered
Completion is saved in this browser.
NEXT LESSON
06 · Put the Framework Together
The final lesson combines level, reaction, confirmation, retest, clear room, and review into one repeatable observation workflow.
Structural-room measurements and example thresholds are for education, journaling, and historical review. They are not targets, probabilities, signals, or recommendations.